Category Archives: News

Can commercial solar panels save you money fast?

For any business, energy bills will unequivocally have a true impact on your overall earnings. this is often even more true for those of a smaller nature, handling lesser margins of profit and income. So, surely any way of reducing your overall bills is worth considering? Absolutely, and one of those ways is with solar panels, whereby you use the energy from the sun to heat water or provide electricity, meaning you rely less on the national grid. It sounds simple, but is it a worthwhile investment?

Solar PV energy for business is one among the simplest ways to chop costs. Sure, there’s an initial outlay which can look expensive. However, the mid-to-long-term benefits quite outweigh any commercial solar array cost. By producing your own business electricity, you’ll see reductions in your electricity bill almost instantly. In fact, the typical cost of manufacturing commercial solar PV energy is 5p per kWh. Currently, businesses pay between 11p and 15p for an equivalent amount of energy from their suppliers. So, even on current prices, investing in commercial solar panels is probably worth it. Add the incontrovertible fact that energy bills are set to double within the next ten years, and you’ll see how solar panels could save your business from increased fees for energy.

Your first concern with commercial solar PV will likely be seeing a return on your investment. But it’s worth looking further down the road. Once you’ve recovered the initial cost, all of your savings can then be redirected to other areas of your business, helping you to grow and expand. By taking control of your energy usage, you’ll likely also start to find some ways to enhance your energy efficiency – cutting costs even further. This will be achieved during a number of ways, from installing extra insulation to using energy efficient equipment like LED and CFL bulbs. That said, you do need to understand Feed-In Tariffs (FIT). These are part of a government subsidy designed to market the use of renewable energy. Businesses who produce an excess amount of renewable energy can use FIT’s to sell their energy back to the national grid, meaning you can make even more big savings!

So to cut to the core, solar panels for commercial buildings provide businesses with the prospect to save lots of money, and perhaps even make extra money, all whilst promoting themselves as a green and socially conscious business. We should probably make clear that there is massive competitiveness within the solar energy market. Emerging giants like China and India are the most important polluters yet they are also global leaders in solar energy station development. Ironic? Yes, but this sheer competitiveness will cause lower prices for solar panels and more efficient storage solutions in the long run. All these developments will hopefully reach the UK residential and commercial solar markets. The changes will prompt less costly and more efficient solar energy modules which will easily be installed for your homes and businesses.

Why Is Laser Engraving Becoming More Popular

Laser engraving has been growing in popularity. But why is this?

One reason why laser engraving is becoming more popular is that it allows you to personalise many different items. You can add your own touch to gifts for yourself or your family. It helps to make items more personal.
Another reason why this is popular is that it is long-lasting. Some other personalised gifts you can buy are not always the best quality. Sometimes the personalised messaged can wear away. This does not happen with laser engraving. For example, if you engrave glass it is there forever. The only time it will go is if the item is smashed.
Finally, it is becoming more popular because there are no limits. As long as the item fits in the machine, it can be engraved. As long as the message or drawing fits on the object, it can be engraved. You are free to choose whatever you want.

What Is Lean Manufacturing?

Lean manufacturing originated from Japan, and therefore the idea was based on eliminating ‘muda’ (futility, uselessness, wastefulness) from your business.

This essentially means that the worth of your products is increased thanks to it being made strictly for the customers’ requirements, while you’re business is also better placed to make savings and operate more efficiently.

Those who practice lean manufacturing will look to reduce waste from their business by examining the 7 sorts of ‘mudas’: 

1. Transport 

Moving products costs money and adds no real value. 

2. Inventory 

Products take up space, got to be moved and may become damaged. 

3. Motion 

Getting to work or moving equipment around wastes time. 

4. Waiting 

Waiting for repairs or expecting a delivery of product or material is not ideal.

5. Overproduction 

Making an excessive amount of product. 

6. Over-processing 

Using a machine or methods that takes longer and doesn’t add more value. 

7. Defects 

Products that are replaced, repaired or, worse, recalled. 

For you to realise and reap the rewards of lean manufacturing, the thought is that you simply view your production from the purpose of view of the buyer. Think about what’s necessary! 

BENEfits Of Compressed Air Dryers

Contractors use compressed air dryers for them to improve blasting efficiency. Its name indicates that no moisture is required. Hence if it is at all present, it is likely to cause destruction. There are several types of compressed air dryers, each with its unique features. They are as follows: the membrane air dryer, the refrigerated air dryer, and lastly, the desiccant air dryer. Buyers purchase them depending on the performance as well as reliability. The points down below show the few benefits of compressed air dryers.

They Suspend Moisture To Water Vapour.

Scientifically, when the heat is generated, it causes moisture to turn into vapour. Likewise, in these compressors, water is suspended as vapour in the air that is compressed. As this air travels through the machine via the hoses, it cools, and then it goes back to its initial state. Some problems occur after that process and cause blockage from the wet abrasive. In return, a lot of time is wasted as professionals try to undo the clogging in the lines.

They Help In Controlling The Abrasive.

The dry air eases the flow of the abrasive because it cannot be controlled when the air is wet. You must try to hinder any clogging issues whatsoever. This can be done by boosting the machine with an AirPrep system. The dryer the air, the lesser the amount of abrasive to be put in use. That is undoubtedly a bonus to the owner because they will not use a lot of abrasive. Hence it will last for a longer duration, and they will also clean up less.

They Eliminate Routine Problems.

When the air is dry, it stops any problems brought about by water droplets on a surface that has been painted recently or a steel surface that has been blasted not so long ago. It also hinders black moisture shadow, which causes flash corrosion on the surface.

The above points show the advantages of any compressed air dryer. It is necessary for people who plan to own them or have them to have these benefits at the palm of their hands. This is because they can come handy at any time. It does not hurt to be empowered with knowledge. These dryers should also be operated on by specialists who have a hang on what they are doing. Failure to that a lot of losses will be incurred. Clean compressed air should be used because it improves blasting efficiency as well as earns the firm credit. Also, remember to try to prevent clogging.

Will a laser cutting machine improve your factory processes?

The question in many people’s mind is, will a laser cutting machine improve your factory processes? It’s one of those questions that can’t easily be answered, as it depends on your current processes and the amount of profit you currently make from cutting through materials. But let’s consider a few things. The basic question should be, what does design for manufacturing consider most? Cost of production and the quality of the product are the basic considerations. Manufacturers embrace any development that touches on the ease, efficiency, time reduction, simplicity and cost reduction. Laser cutting machine answers all these concerns. The following reasons will make laser cutting improve your factory processes.

Easily Customised
Unlike most cutters, lasers are easily customised to cut all materials of all thickness and to any specification. Your factory, therefore, needs only a laser cutter for all materials. However, proper training of the personnel is vital.

Easily Adjustable
Laser cutting machines are easy and quick to adjust. This means that you only need laser cutters for all your factory processes. Changing from material to another is quick and easy.

Fast and Accurate
A revolution in the factory processes is now ripe. The advantage of laser cutters is its ability to cut fast and accurately. So, it’s the most accurate and the fastest.

Clean Cutting Process
Among all the cutters, laser cutting is the cleanest. Your factory process will now have reduced cleaning. Very little secondary cleaning is required when using laser cutting. This saves your time and resources hence reducing the production costs and time.

Inspires Creativity
Laser cutting machines are known to cut any shape and any form. This is because the cutter doesn’t touch the part being cut. Your factory processes are meant to highly improve. You can now bring more creativity into the work by making many designs and shapes.

Increases Choices
With the ability to cut any shape, any material and any thickness, you no longer need to buy material based on availability and cost. It’s now a matter of the best material for the work ahead. Knowing that you can cut any material, you will now go for only the best.

Laser cutting machines are a big boost to all factory processes. It is now easier, quicker, less costly, simple and efficient, whilst these machines have come down in price considerably. So yes we would recommend you at least look at the different models available, because you may find a machine that’s within your budget and can help you automate some tedious manual tasks. Of course, there is going to be an element of training needed, especially if your staff have never experienced laser cutting before, so this will also need to be factored in. But the more homework you do now the better. There are plenty of laser cutting machines, all of different levels, so it’s important you look at the specification closely, ensure you understand the different features and also take note of the measurements, so you can work out how it will function efficiently in your workplace, delivering the level of performance you need.