Laser cutting is an intricate and unique way of creating tactile items. Part of the uniqueness comes from the different techniques and methods that can be incorporated into the production process. This post looks to outline some of the processes that can be used to create a unique design.
Masking involves protecting areas of an engraving, so as to not induce a smoking effect on the engraving. Laser engraving causes smoke to form. This smoke can then stain the edges of the engraved surface. So to avoid this, masking tape is used. This creates a cleaner finish over all.
A laser cutter should have some suggested settings for cutting or engraving different materials and different thicknesses. You should also be able to load these settings into your computer or laser and save them as pre-sets. Adjusting the pre-sets allows you to form a palette of different cutting techniques, allowing you to switch between them easily.
Lasers. Not a science fiction fantasy anymore. An industry that takes the idea of “if you can dream it, we can do it” to the next level. Almost any material, almost any design, and with quicker turnaround times than ever, why aren’t you already getting your designs together to send off?
Think of most any household materials: wood, plywood, plastic, paper, fabric, metal, glass, acrylic, stone; all things that can be laser cut. Are the wheels turning, ideas forming? Millions of projects at your fingertips with just about anything you have lying around the house. The 21st century is here and with laser cutting UK, you can do just about anything you have in mind. Continue reading Laser Cutting – What you are going to create next?
An industrial plasma cutter is a machine that is used to cut right through different metals. It consists of an inert gas blown out of a nozzle which is then ignited by an electrical arc. Upon the ignition, the gas turns into plasma which is hot enough to cut through different metal thicknesses. It is used in different industries for example the manufacturing, automotive repair and shipbuilding industries among others. These machines come in different brands and prices in the UK. If you need to get value for the money that you intend to spend then there are definitely some factors that you need to consider before buying one.
Factors to Consider When Buying an Industrial Plasma Cutter
1. Thickness of the metal that you intend to cut most often
The power sources of these machines are determined by their amperage and cutting capabilities. Thick metals require high amperage machines while thinner metals require low amperage machines in order to get the precise cutting edges. Continue reading Factors to Consider When Buying a Plasma Cutter Machine
Mimic panels are units that are designed to assist in showing the overall installation and layout of an electrical and gas setup in a property. This type of panel can be utilised to ensure that a full appraisal can be made with regards to managing the ability to handle any lighting or signaling actions in the space that it has been installed in for any specific use that a site may hold.
This is often installed at a space like the entrance of a building to ensure that it is easy to read and identify. It can also show information on any issues that may come about with the electric setup within a building. It can use lights to show information on when any errors may have come about in a space or when some items have been activated for use in the workplace. Continue reading Mimic Panels Can Be Protective In Many Sites
We all run the tap in the morning to brush our teeth and it can be baffling to understand how water can cut heavy duty materials like thick stainless steel. That said, these machines do exist but perhaps they do not quite work in the way you’d expect.
It’s not simple a water pistol that’s controlled by a computer, water could not effortlessly cut metals, no matter how small the jet is, yet water combined with abrasive garnet can. Water shoots down a nozzle, though a ruby or diamond, where it’s introduced to an abrasive garnet.
The formula then heads into a guard where it’s sent down to cut the metal and that’s it. Obviously a great deal of power is required to really give the machine some force, but the cutting method is as simple as that, and the nozzle can be controlled for thick or thin cuts.